Vacuum Gauge Controllers
Measurement Range
1 E-5 … atm
1 E-9 … atm
No result can be shown for this combination of filters.
Reset the filters to get results.
Reset the filters to get results.
Vacuum Gauge Controller
TPG36x
Advanced controller for process measurement and data recording.
TPG36x
- Easy-to-use dot matrix menu interface for adjusting parameters, sensors or general settings
- Clearly visible and bright display for remote reading of device data
- Bar graph for visualizing setpoints or displaying pressure over time
Vacuum Gauge Controller
IRC081
The Ion Reference gauge Controller IRC081 and its user interface are an operating and display interface to the standardized Ion Reference Gauge IRG080.
IRC081
- Operating and display solution for accurate vacuum pressure measurement
- User control on all IRG080 gauge parameters set
- Simple manual operation with 5 potentiometers
- User Interface connection via USB-B port to PC
Vacuum Gauge Controller
IM540
Versatile hot cathode ionization passive gauge controller
IM540
- Supports the operation of the IE414 (Bayard-Alpert) and the IE514 (extractor) hot cathode ionization gauges
- Two active gauges from the PSG5xx (Pirani), PCG55x (Pirani-Capacitance diaphragm) and CDG (Capacitance diaphragm) active gauge lines can be connected and operated
- Simple operation with menu guided display for parameter, sensor or general settings
Vacuum Gauge Controller
VGC094
VGC094 is a prestigious solution for vacuum process measurement, control and data log.
VGC094
- Complete solution for vacuum monitoring and control monitor from 1×10-11 to 1000 mbar, even at long distance
- Bright and clear screen
- Bar graph display with set-point or pressure vs. time views
- Simple sensor operation with intuitive and guided menus for parameter, sensor or general settings
Vacuum Gauge Controller
VGD500
Connect to INFICON CDG product line to provide a 4 Digit Display
VGD500
- 4 Digit display for easy read out
- Large 10mm active LED display -
readable from distance and wide range gauge of angle - In-line plug design
- 15pin D-Sub, no extra power connection
Vacuum Gauge Controller
PGD500
Cost effective pressure monitoring solution.
PGD500
- User selectable measurement unit (Pa, mbar or Torr)
- Compact bench top model design can be easily mounted in a panel or 19" rack
- 0 to 10 V output signal from the gauge is available for use in PLC or with a chart recorder
- One free adjustable set point
Vacuum Gauge Controller
VGC50x
Sustainable solution for process measurement, control and data log.
VGC50x
- Simple operation with dot matrix menu guided display for parameter, sensor or general settings
- Very bright and clear Display for long distance Instrument read- out
- Bar graph display with setpoints's or pressure vs. time display
Vacuum Gauge Controller
VGC031
Single channel controller for PGE050
VGC031
- Display`s and control wide measurement range from 1.3×10-4 up to 1333 mbar
- Bright digital OLED display with keypad for simple set up and Operation
- 4 user selectable analog output signals, 2 set point relays
- RS232/RS485 digital Interface
Vacuum Gauge Controller
VGC083
Three channel controller for passive gauges
VGC083
- Flexible solution for vacuum pressure monitoring and controlling from atmosphere down to ultra-high vacuum
- Clear and simple operation with three individual bright LED displays
- Parameter, sensor and general settings with softkeys