Vacuum Gauge Controller

PGD500

The INFICON Pirani Gauge Display PGD500 in combination with the INFICON Pirani Standard Gauge PSG5xx provides a cost effective pressure monitoring solution.

Although it is called Pirani Gauge Display the PGD500 also supports our PCG55x and MPG series vacuum gauges.

Advantages

User selectable measurement unit (Pa, mbar or Torr)
Compact bench top model design can be easily mounted in a panel or 19" rack
0 to 10 V output signal from the gauge is available for use in PLC or with a chart recorder
One free adjustable set point
CE certified

Typical Applications

Fore vacuum pressure measurement
Pressure measurement on evacuation/filling stations for RAC applications
Pressure measurement in light bulb production lines
General vacuum measurement and control in the medium and rough vacuum range

Specifications

Type		PGD500
Measurement channels		1 (PSG5xx, PCG5xx or MPG series)
Display		LCD
Range	Pa mbar Torr	5×10^-7 … 1.5×10⁵ 5×10^-9 … 1500 3.75x10^-9... 1125
Measurement rate	1/s	30
Measurement unit (selectable)		Pa, mbar, Torr
Setpoint
Setpoint relay	Setpoint relay	1
Adjustment range (depending on gauge)	Adjustment range (depending on gauge)	1×10^-8 … 500
Hysteresis	Hysteresis	≥10% of measurement value
Relay contact	Relay contact	floating changeover contact
Contact rating	V (ac) A (ac)	50 5
Connector	Connector	D‑Sub, 9‑pole, male
Analog output	V	0 … 10.3, sensor output signal
Power
Supply	V (ac)	100 … 240
Frequency	Hz	50 … 60
Consumption	VA	≤30
Temperature
Operation (ambiance)	°C	+5 … +50
Storage	°C	–20 … 60
Relative humidity		≤80% up to +31 °C, decreasing to 50% at +40 °C
Degree of protection		IP20
Weight	kg	0.85