Más información sobre nuestros productos y servicios.
ELT Vmax:
Maximize Quality and Production Efficiency in Full Automated Battery Mass Production
About the webinar
With the new ELT Vmax electrolyte leak tester, new dimensions are being scaled. Specially developed for use in industrial series production, the ELT Vmax is able to test all metal ion batteries.
Our expert Emre Germen will show examples on how to achieve the maximum throughput with keeping the necessary sensitivity, and guide you through the most important new features and its easy installation in test systems.
Main topics of the webinar:
- Fully automated process
- Typical Application
- Product features
- How can I achieve the highest possible throughput
Don't miss this opportunity to deepen your understanding of INFICON's technology.
Related webinars
Basic knowledge explained easy and practice-oriented
How to determine and ensure the permissible leak tightness of your product
Intelligent solution for real-time vacuum gas monitoring
How to measure your factory performance
How to measure your factory performance
How to measure your factory performance
Easy with the new Sentrac Leak Detector
Our new Gas Analyzer. Product introduction, availability, successful implementations of pre-production systems
Technical consideration of a test leak, test leak applications, Certifications
Easy and efficient hydrogen sniffing leak testing
A Basic Guide to Capacitive Vacuum Gauges
QCM use in the semiconductor industry for processes like ALD, E-beam, resistive source and sputtering.
Quartz crystal microbalance (QCM) technology has been used for decades to control deposition rate and thickness for the most complex processes seen in the ophthalmic, optical, display, and solar markets. INFICON has recently made a new advancement in QCM technology to address a problem seen across all of these industries related to QCM temperature effects. Thermal shock can cause QCM thickness errors which can decrease yield and increase manufacturing costs if temperature is not accounted for correctly.
Temperature impacts the frequency measurement and can create false mass readings. Thin film deposition controllers currently on the market have no good way of distinguishing frequency shifts related to mass from frequency shifts related to temperature, resulting in thickness errors and poor PID control. This can be detrimental to complex coating processes due to the low deposition rates and incredibly thin layers required. Thermal shocks can occur at any point in a deposition process and can cause unnecessary PID-loop corrections, triggering non-uniform deposition in respect to time. This means that the quality throughout the bulk of the material is inadequate. For very thin films, the thickness termination may not be at the real intended thickness because the process time window is small compared to the time allowed for a QCM to recover from a thermal shock event.
INFICON has patented a new temperature compensation technique for SC-cut crystals to remove the effects of temperature variation on the QCM without the need for additional hardware or custom and expensive sensors.
Please join us for the ‘Temperature Compensation for QCMs’ webinar, hosted by Sheldon Wayman, Product Engineer for INFICON Inc.