INFICON ACADEMY

立即注册参加下一次网络研讨会/研讨会或预订定制的培训内容,以满足您的具体需求。我们期待着您的来信!

所有的选择提供

网络研讨会
SMART-Spray, I-Boost, SPRAY-Check

Smart essentials for intelligent leak detection

多个日期
60 minutes
English
更多信息
网络研讨会
Temperature Compensation for QCMs

Quartz crystal microbalance (QCM) technology has been used for decades to control deposition rate and thickness for the most complex processes seen in the ophthalmic, optical, display, and solar markets. INFICON has recently made a new advancement in QCM technology to address a problem seen across all of these industries related to QCM temperature effects. Thermal shock can cause QCM thickness errors which can decrease yield and increase manufacturing costs if temperature is not accounted for correctly.

Temperature impacts the frequency measurement and can create false mass readings. Thin film deposition controllers currently on the market have no good way of distinguishing frequency shifts related to mass from frequency shifts related to temperature, resulting in thickness errors and poor PID control. This can be detrimental to complex coating processes due to the low deposition rates and incredibly thin layers required. Thermal shocks can occur at any point in a deposition process and can cause unnecessary PID-loop corrections, triggering non-uniform deposition in respect to time. This means that the quality throughout the bulk of the material is inadequate. For very thin films, the thickness termination may not be at the real intended thickness because the process time window is small compared to the time allowed for a QCM to recover from a thermal shock event.

INFICON has patented a new temperature compensation technique for SC-cut crystals to remove the effects of temperature variation on the QCM without the need for additional hardware or custom and expensive sensors.

Please join us for the ‘Temperature Compensation for QCMs’ webinar, hosted by Sheldon Wayman, Product Engineer for INFICON Inc.

20 minutes
English
更多信息
网络研讨会
Air Sampling with HAPSITE CDT

HAPSITE CDT provides versatility for military, civilian and hazardous response teams to identify and quantify narcotics, Chemical Warfare Agents (CWA), Fourth Generation Agents (FGA), explosives and toxic industrial chemical threats on-site to develop critical health risk assessments, quickly.  The new handheld cartridge-based sampling system allows users to carry lighter equipment, quickly deploy and get multiple samples analyzed onsite.  This webinar will review air sampling using the HAPSITE CDT.

多个日期
60 minutes
English
更多信息
网络研讨会
ELT Vmax

Maximize Efficiency in full automated battery mass production

19 minutes
English
更多信息
网络研讨会
QCMs and Thin Film Processes in Semi

QCM use in the semiconductor industry for processes like ALD, E-beam, resistive source and sputtering.

22 minutes
English
更多信息
网络研讨会
Mastering Vacuum Measurements

A Basic Guide to Capacitive Vacuum Gauges

36 minutes
English
更多信息
网络研讨会
EcoBoost

New Feature for Faster Cycle Times and Cost Savings

23 minutes
English
更多信息
网络研讨会
ELT3000 electrolyte leak tester in battery mass production
50 min
English
更多信息
网络研讨会
IRwin – Methane Leak Detector

A multitool for safety leak check on city gas distribution pipes systems.

1 hour
English
更多信息
所有选择
所有选择
现场网络研讨会
研讨会
定制网络研讨会
所有语言
所有语言
德语
英文
所有市场
所有市场
暖通空调/制冷
工业制造
真空镀膜
安全
能源
半导体IDM和晶圆代工厂
半导体设备制造商
显示
医药和医疗
移动和汽车
研究与学术界
分析仪器
电池
包装
所有地点
所有地点
德国科隆
在线

关于 INFICON ACADEMY

INFICON ACADEMY可以帮助您扩展创新测量技术、关键过程传感器技术和智能制造/工业4.0软件解决方案的知识。