$ EZ-EDS Version 3.3 Generated Electronic Data Sheet $ $ Electronic Data Sheet $ Inficon PSG550 (Integer Configuration) $ [File] DescText = "Inficon PSG550 EDS File - (INT)"; CreateDate = 12-16-2008; CreateTime = 12:00:00; ModDate = 01-19-2010; ModTime = 12:00:00; Revision = 1.2; HomeURL = "www.inficon.com"; [Device] VendCode = 633; $ Vendor ID VendName = "INFICON AG"; $ Vendor Name ProdType = 28; $ Device Type ProdTypeStr = "Vacuum Pressure Gauge"; ProdCode = 21; $ Product Code MajRev = 1; $ Major Rev MinRev = 1; $ Minor Rev ProdName = "PSG550"; [IO_Info] Default = 0x0001; PollInfo = 0x0001, $ only Poll 2, $ Default: Input 2 0; $ No Output $ Input Assemblies Input1 = 2, $ bytes to be transferred 0, $ significant bits 0x0001, $ compatible I/O type mask "Input Assembly 1", $ name 6, $ connection path size "20 04 24 01 30 03", $ connection path "INT Pressure"; $ help string Input2 = 3, $ bytes to be transferred 0, $ significant bits 0x0001, $ compatible I/O type mask "Input Assembly 2", $ name 6, $ connection path size "20 04 24 02 30 03", $ connection path "Exception Status, INT Pressure"; $ help string Input3 = 4, $ bytes to be transferred 0, $ significant bits 0x0001, $ compatible I/O type mask "Input Assembly 3", $ name 6, $ connection path size "20 04 24 03 30 03", $ connection path "Exception Status, Trip Status, INT Pressure"; $ help string Input4 = 4, $ bytes to be transferred 0, $ significant bits 0x0001, $ compatible I/O type mask "Input Assembly 4", $ name 6, $ connection path size "20 04 24 04 30 03", $ connection path "REAL Pressure"; $ help string Input5 = 5, $ bytes to be transferred 0, $ significant bits 0x0001, $ compatible I/O type mask "Input Assembly 5", $ name 6, $ connection path size "20 04 24 05 30 03", $ connection path "Exception Status, REAL Pressure"; $ help string Input6 = 6, $ bytes to be transferred 0, $ significant bits 0x0001, $ compatible I/O type mask "Input Assembly 6", $ name 6, $ connection path size "20 04 24 06 30 03", $ connection path "Exception Status, Trip Status, REAL Pressure"; $ help string Input7 = 1, $ bytes to be transferred 0, $ significant bits 0x0001, $ compatible I/O type mask "Input Assembly 8", $ name 6, $ connection path size "20 04 24 08 30 03", $ connection path "Exception Status"; $ help string Input8 = 4, $ bytes to be transferred 0, $ significant bits 0x0001, $ compatible I/O type mask "Input Assembly 9", $ name 6, $ connection path size "20 04 24 09 30 03", $ connection path "Active Sensor No., INT Pressure"; $ help string Input9 = 5, $ bytes to be transferred 0, $ significant bits 0x0001, $ compatible I/O type mask "Input Assembly 10", $ name 6, $ connection path size "20 04 24 0A 30 03", $ connection path "Exception Status, Active Sensor No., INT Pressure"; $ help string Input10 = 6, $ bytes to be transferred 0, $ significant bits 0x0001, $ compatible I/O type mask "Input Assembly 11", $ name 6, $ connection path size "20 04 24 0B 30 03", $ connection path "Exception Status, Trip Status, Active Sensor No., INT Pressure"; $ help string Input11 = 6, $ bytes to be transferred 0, $ significant bits 0x0001, $ compatible I/O type mask "Input Assembly 12", $ name 6, $ connection path size "20 04 24 0C 30 03", $ connection path "Active Sensor No., REAL Pressure"; $ help string Input12 = 7, $ bytes to be transferred 0, $ significant bits 0x0001, $ compatible I/O type mask "Input Assembly 13", $ name 6, $ connection path size "20 04 24 0D 30 03", $ connection path "Exception Status, Active Sensor No., REAL Pressure"; $ help string Input13 = 8, $ bytes to be transferred 0, $ significant bits 0x0001, $ compatible I/O type mask "Input Assembly 14", $ name 6, $ connection path size "20 04 24 0E 30 03", $ connection path "Exception Status, Trip Status, Active Sensor No., REAL Pressure"; $ help string [ParamClass] MaxInst = 47; $ Max Instances Descriptor = 0x0000; $ Parameter Class Descriptor CfgAssembly = 0; $ Configuration Assembly Instance [Params] $ **************************************************************************** $ * Active Value $ **************************************************************************** Param1 = 0, $ parameter value slot 6,"20 31 24 00 30 5E", $ link size and path 0x0030, $ descriptor (RO, Mon) 0xC3, $ INT 2, $ number of bytes "Active Value", $ parameter name "", $ units string "", $ help string 0,32767,0, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 8; $ precision $ **************************************************************************** $ * Active Instance $ **************************************************************************** Param2 = 0, $ parameter value slot 6,"20 31 24 00 30 5F", $ link size and path 0x0030, $ descriptor (RO, Mon) 0xC7, $ UINT 2, $ number of bytes "Active Instance", $ parameter name "", $ units string "", $ help string 0,2,1, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 0; $ precision $ **************************************************************************** $ * Class Level Status Extension $ **************************************************************************** Param3 = 0, $ parameter value slot 6,"20 31 24 00 30 20", $ link size and path 0x0032, $ descriptor (RO, Mon, Enum) 0xD1, $ BYTE 1, $ number of bytes "Class Level Status Extension", $ parameter name "", $ units string "", $ help string 0x00,0xFF,0x00, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 0; $ precision Enum3 = 0,"Reading Invalid", 1,"Overrange Exceeded", 2,"Underrange Exceeded", 3,"res.", 4,"res.", 5,"res.", 6,"res.", 7,"res."; $ **************************************************************************** $ * Pressure Unit $ **************************************************************************** Param4 = 0, $ parameter value slot 6,"20 31 24 01 30 04", $ link size and path 0x0002, $ descriptor (Enum) 0xC7, $ UINT 2, $ number of bytes "Pressure Unit", $ parameter name "", $ units string "Data Units for all pressure values", $ help string 0x1001,0x1309,0x1001, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 0; $ precision Enum4 = 0x1001,"Counts", 0x1301,"Torr", 0x1308,"mBar", 0x1309,"Pascal"; $ **************************************************************************** $ * Data Type $ **************************************************************************** Param5 = 0, $ parameter value slot 6,"20 31 24 01 30 03", $ link size and path 0x0002, $ descriptor (Enum) 0xC6, $ USINT 1, $ number of bytes "Data Type", $ parameter name "", $ units string "Data Type for all pressure values", $ help string 0xC3,0xCA,0xC3, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 0; $ precision Enum5 = 0xC3,"16-bit Signed Integer", 0xCA,"32-bit Floating Point Value"; $ **************************************************************************** $ * IO Assembly $ **************************************************************************** Param6 = 0, $ parameter value slot 6,"20 05 24 02 30 64", $ link size and path 0x0002, $ descriptor (Enum) 0xC6, $ USINT 1, $ number of bytes "Poll IO Assembly", $ parameter name "", $ units string "Changes take effect only after a Reset of the Device", $ help string 1,14,2, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 0; $ precision Enum6 = 1,"IO Assembly 1", 2,"IO Assembly 2", 3,"IO Assembly 3", 4,"IO Assembly 4", 5,"IO Assembly 5", 6,"IO Assembly 6", $ 7,"not supported", 8,"IO Assembly 8", 9,"IO Assembly 9", 10,"IO Assembly 10", 11,"IO Assembly 11", 12,"IO Assembly 12", 13,"IO Assembly 13", 14,"IO Assembly 14"; $ **************************************************************************** $ *********************** S-Device Supervisor ******************************** $ **************************************************************************** $ **************************************************************************** $ * Device State $ **************************************************************************** Param7 = 0, $ parameter value slot 6,"20 30 24 01 30 0B", $ link size and path 0x0032, $ descriptor (RO, Mon, Enum) 0xC6, $ USINT 1, $ number of bytes "Device State", $ parameter name "", $ units string "", $ help string 0,7,0, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 0; $ precision Enum7 = 0,"Undefined", 1,"Self Testing", 2,"Idle", 3,"Self Test Exception", 4,"Executing", 5,"Abort", 6,"Critical fault", 7,"res."; $ **************************************************************************** $ * Exception Status $ **************************************************************************** Param8 = 0, $ parameter value slot 6,"20 30 24 01 30 0C", $ link size and path 0x0032, $ descriptor (RO, Mon, Enum) 0xD1, $ BYTE 1, $ number of bytes "Exception Status", $ parameter name "", $ units string "", $ help string 0x00,0xFF,0x80, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 0; $ precision Enum8 = 0,"Alarm Device Common", 1,"Alarm Device Specific", 2,"Alarm Manufacterer Specific", 3,"reserved", 4,"Warning Device Common", 5,"Warning Device Specific", 6,"Warning Device Common", 7,"Enhanced Mode"; $ **************************************************************************** $ * Exception Alarm Enable $ **************************************************************************** Param9 = 0, $ parameter value slot 6,"20 30 24 01 30 0F", $ link size and path 0x0002, $ descriptor (Enum) 0xC1, $ BOOL 1, $ number of bytes "Enable Alarm", $ parameter name "", $ units string "", $ help string 0,1,1, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 0; $ precision Enum9 = 0,"Disable", 1,"Enable"; $ **************************************************************************** $ * Exception Warning Enable $ **************************************************************************** Param10 = 0, $ parameter value slot 6,"20 30 24 01 30 10", $ link size and path 0x0002, $ descriptor (Enum) 0xC1, $ BOOL 1, $ number of bytes "Enable Warning", $ parameter name "", $ units string "", $ help string 0,1,1, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 0; $ precision Enum10 = 0,"Disable", 1,"Enable"; $ **************************************************************************** $ * Run Hours - 1 hour resolution $ **************************************************************************** Param59 = 0, $ parameter value slot 6,"20 30 24 01 30 17", $ link size and path 0x0010, $ descriptor (RO) 0xC8, $ UDINT 4, $ number of bytes "Run Hours", $ parameter name "", $ units string "Time resolution is 1 hour", $ help string 0,4294967295,0, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 0; $ precision $ **************************************************************************** $ * Run Hours - 0.25 hour resolution $ **************************************************************************** Param60 = 0, $ parameter value slot 6,"20 30 24 01 30 66", $ link size and path 0x0010, $ descriptor (RO) 0xC8, $ UDINT 4, $ number of bytes "Run Hours", $ parameter name "", $ units string "Time resolution is 0.25 hour", $ help string 0,4294967295,0, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 0; $ precision $ **************************************************************************** $ ************** Heat Transfer Vacuum Gauge (Pirani) ************************* $ **************************************************************************** $ **************************************************************************** $ * Value Pirani $ **************************************************************************** Param22 = 0, $ parameter value slot 6,"20 31 24 01 30 06", $ link size and path 0x0030, $ descriptor (RO, Mon) 0xC3, $ INT 2, $ number of bytes "S1 Value", $ parameter name "", $ units string "", $ help string 0,32767,0, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 8; $ precision $ **************************************************************************** $ * Reading Valid Pirani $ **************************************************************************** Param23 = 0, $ parameter value slot 6,"20 31 24 01 30 05", $ link size and path 0x0030, $ descriptor (RO, Mon) 0xC1, $ BOOL 1, $ number of bytes "S1 Reading Valid", $ parameter name "", $ units string "", $ help string 0,1,0, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 0; $ precision $ **************************************************************************** $ * Pirani Alarm $ **************************************************************************** Param24 = 0, $ parameter value slot 6,"20 31 24 01 30 5F", $ link size and path 0x0032, $ descriptor (RO, Mon, Enum) 0xD2, $ WORD 2, $ number of bytes "S1 Alarm", $ parameter name "", $ units string "", $ help string 0x0000,0xFFFF,0x0000, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 0; $ precision Enum24 = 0,"Sensor Element Failure", 1,"res.", 2,"res.", 3,"res.", 4,"res.", 5,"res.", 6,"res.", 7,"res.", 8,"res.", 9,"Electronics Failure", 10,"res", 11,"res.", 12,"res.", 13,"res.", 14,"res.", 15,"res."; $ **************************************************************************** $ * Pirani Warning $ **************************************************************************** Param25 = 0, $ parameter value slot 6,"20 31 24 01 30 5E", $ link size and path 0x0032, $ descriptor (RO, Mon, Enum) 0xD2, $ WORD 2, $ number of bytes "S1 Warning", $ parameter name "", $ units string "", $ help string 0x0000,0xFFFF,0x0000, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 0; $ precision Enum25 = 0,"res.", 1,"res.", 2,"res.", 3,"res.", 4,"res.", 5,"res.", 6,"res.", 7,"res.", 8,"res.", 9,"Electronics Warning", 10,"res.", 11,"res.", 12,"res.", 13,"res.", 14,"res.", 15,"res."; $ **************************************************************************** $ * Pirani Status Extension $ **************************************************************************** Param26 = 0, $ parameter value slot 6,"20 31 24 01 30 60", $ link size and path 0x0032, $ descriptor (RO, Mon, Enum) 0xD1, $ BYTE 1, $ number of bytes "S1 XStatus", $ parameter name "", $ units string "", $ help string 0x00,0xFF,0x00, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 0; $ precision Enum26 = 0,"Reading Invalid", 1,"Overrange Exceeded", 2,"Underrange Exceeded", 3,"res.", 4,"res.", 5,"res.", 6,"res.", 7,"res."; $ **************************************************************************** $ * Safe State Pirani $ **************************************************************************** Param27 = 0, $ parameter value slot 6,"20 31 24 01 30 19", $ link size and path 0x0002, $ descriptor (Enum) 0xC6, $ USINT 1, $ number of bytes "S1 Safe State", $ parameter name "", $ units string "", $ help string 0,3,0, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 0; $ precision Enum27 = 0,"Zero", 1,"Full Scale", 2,"Hold Last Value", 3,"Use Safe Value"; $ **************************************************************************** $ * Safe Value Pirani $ **************************************************************************** Param28 = 0, $ parameter value slot 6,"20 31 24 01 30 1A", $ link size and path 0x0000, $ descriptor 0xC3, $ INT 2, $ number of bytes "S1 Safe Value", $ parameter name "", $ units string "", $ help string 0,32767,0, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 8; $ precision $ **************************************************************************** $ * Full Scale Pirani $ **************************************************************************** Param29 = 0, $ parameter value slot 6,"20 31 24 01 30 0A", $ link size and path 0x0010, $ descriptor (RO) 0xC3, $ INT 2, $ number of bytes "S1 Full Scale", $ parameter name "", $ units string "", $ help string 0,32767,31672, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 8; $ precision $ **************************************************************************** $ * Overrange Pirani $ **************************************************************************** Param30 = 0, $ parameter value slot 6,"20 31 24 01 30 20", $ link size and path 0x0010, $ descriptor (RO) 0xC3, $ INT 2, $ number of bytes "S1 Overrange", $ parameter name "", $ units string "", $ help string 0,32767,31672, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 8; $ precision $ **************************************************************************** $ * Underrange Pirani $ **************************************************************************** Param31 = 0, $ parameter value slot 6,"20 31 24 01 30 21", $ link size and path 0x0010, $ descriptor (RO) 0xC3, $ INT 2, $ number of bytes "S1 Underrange", $ parameter name "", $ units string "", $ help string 0,32767,6038, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 8; $ precision $ **************************************************************************** $ * Pirani Status $ **************************************************************************** Param32 = 0, $ parameter value slot 6,"20 31 24 01 30 07", $ link size and path 0x0032, $ descriptor (RO, Mon, Enum) 0xD1, $ BYTE 1, $ number of bytes "S1 Status", $ parameter name "", $ units string "", $ help string 0x00,0xFF,0x00, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 0; $ precision Enum32 = 0,"High Alarm Exception", 1,"Low Alarm Exception", 2,"High Warning Exception", 3,"Low Warning Exception", 4,"res", 5,"res", 6,"res", 7,"res"; $ **************************************************************************** $ *********************** Trip Point Objects ********************************* $ **************************************************************************** $ **************************************************************************** $ * Trip Point 1 - High Trip Enable $ **************************************************************************** Param45 = 0, $ parameter value slot 6,"20 35 24 01 30 04", $ link size and path 0x0000, $ descriptor 0xC1, $ BOOL 1, $ number of bytes "T1 High Trip Enable", $ parameter name "", $ units string "", $ help string 0,1,0, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links 0; $ precision Enum45 = 0,"Disable", 1,"Enable"; $ **************************************************************************** $ * Trip Point 1 - Low Trip Enable $ **************************************************************************** Param46 = 0, $ parameter value slot 6,"20 35 24 01 30 06", $ link size and path 0x0000, $ descriptor 0xC1, $ BOOL 1, $ number of bytes "T1 Low Trip Enable", $ parameter name "", $ units string "", $ help string 0,1,1, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links ; $ precision Enum46 = 0,"Disable", 1,"Enable"; $ **************************************************************************** $ * Trip Point 1 - High Trip point $ **************************************************************************** Param47 = 0, $ parameter value slot 6,"20 35 24 01 30 03", $ link size and path 0x0000, $ descriptor 0xC3, $ INT 2, $ number of bytes "T1 High Trip Point", $ parameter name "", $ units string "", $ help string -32768,32767,32292, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links ; $ precision $ **************************************************************************** $ * Trip Point 1 - Low Trip Point $ **************************************************************************** Param48 = 0, $ parameter value slot 6,"20 35 24 01 30 05", $ link size and path 0x0000, $ descriptor 0xC3, $ INT 2, $ number of bytes "T1 Low Trip Point", $ parameter name "", $ units string "", $ help string -32768,32767,5698, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links ; $ precision $ **************************************************************************** $ * Trip Point 1 - Status $ **************************************************************************** Param50 = 0, $ parameter value slot 6,"20 35 24 01 30 07", $ link size and path 0x0032, $ descriptor (RO, Mon, Enum) 0xC1, $ BOOL 1, $ number of bytes "T1 Status", $ parameter name "", $ units string "", $ help string 0,1,0, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links ; $ precision Enum50 = 0,"unasserted", 1,"asserted"; $ **************************************************************************** $ * Trip Point 1 - Setpoint Mode $ **************************************************************************** Param61 = 0, $ parameter value slot 6,"20 35 24 01 30 66", $ link size and path 0x0020, $ descriptor (Mon) 0xC6, $ USINT 1, $ number of bytes "T1 Setpoint Mode", $ parameter name "", $ units string "", $ help string 0,4,0, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links ; $ precision $ **************************************************************************** $ * Trip Point 1 - High Hysteresis $ **************************************************************************** Param63 = 0, $ parameter value slot 6,"20 35 24 01 30 12", $ link size and path 0x0000, $ descriptor 0xC3, $ INT 2, $ number of bytes "T1 High Hysteresis", $ parameter name "", $ units string "", $ help string 0,32767,28780, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links ; $ precision $ **************************************************************************** $ * Trip Point 1 - Low Hysteresis $ **************************************************************************** Param64 = 0, $ parameter value slot 6,"20 35 24 01 30 13", $ link size and path 0x0000, $ descriptor 0xC3, $ INT 2, $ number of bytes "T1 Low Hysteresis", $ parameter name "", $ units string "", $ help string 0,32767,2187, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links ; $ precision $ **************************************************************************** $ * Trip Point 1 - Trip Status $ **************************************************************************** Param65 = 0, $ parameter value slot 6,"20 35 24 01 30 14", $ link size and path 0x0032, $ descriptor (RO, Mon, Enum) 0xC6, $ USINT 1, $ number of bytes "T1 Trip Status", $ parameter name "", $ units string "", $ help string 0,3,0, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links ; $ precision Enum65 = 0,"no trip condition", 1,"low trip condition", 2,"high trip condition", 3,"high and low trip condition"; $ **************************************************************************** $ * Trip Point 2 - High Trip Enable $ **************************************************************************** Param52 = 0, $ parameter value slot 6,"20 35 24 02 30 04", $ link size and path 0x0022, $ descriptor (Mon, Enum) 0xC1, $ BOOL 1, $ number of bytes "T2 High Trip Enable", $ parameter name "", $ units string "", $ help string 0,1,0, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links ; $ precision Enum52 = 0,"Disable", 1,"Enable"; $ **************************************************************************** $ * Trip Point 2 - Low Trip Enable $ **************************************************************************** Param53 = 0, $ parameter value slot 6,"20 35 24 02 30 06", $ link size and path 0x0022, $ descriptor (Mon, Enum) 0xC1, $ BOOL 1, $ number of bytes "T2 Low Trip Enable", $ parameter name "", $ units string "", $ help string 0,1,1, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links ; $ precision Enum53 = 0,"Disable", 1,"Enable"; $ **************************************************************************** $ * Trip Point 2 - High Trip point $ **************************************************************************** Param54 = 0, $ parameter value slot 6,"20 35 24 02 30 03", $ link size and path 0x0020, $ descriptor (Mon) 0xC3, $ INT 2, $ number of bytes "T2 High Trip Point", $ parameter name "", $ units string "", $ help string -32768,32767,32292, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links ; $ precision $ **************************************************************************** $ * Trip Point 2 - Low Trip Point $ **************************************************************************** Param55 = 0, $ parameter value slot 6,"20 35 24 02 30 05", $ link size and path 0x0020, $ descriptor (Mon) 0xC3, $ INT 2, $ number of bytes "T2 Low Trip Point", $ parameter name "", $ units string "", $ help string -32768,32767,5698, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links ; $ precision $ **************************************************************************** $ * Trip Point 2 - Status $ **************************************************************************** Param57 = 0, $ parameter value slot 6,"20 35 24 02 30 07", $ link size and path 0x0032, $ descriptor (RO, Mon, Enum) 0xC1, $ BOOL 1, $ number of bytes "T2 Status", $ parameter name "", $ units string "", $ help string 0,1,0, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links ; $ precision Enum57 = 0,"unasserted", 1,"asserted"; $ **************************************************************************** $ * Trip Point 2 - Setpoint Mode $ **************************************************************************** Param62 = 0, $ parameter value slot 6,"20 35 24 02 30 66", $ link size and path 0x0020, $ descriptor (Mon) 0xC6, $ USINT 1, $ number of bytes "T2 Setpoint Mode", $ parameter name "", $ units string "", $ help string 0,4,0, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links ; $ precision $ **************************************************************************** $ * Trip Point 2 - High Hysteresis $ **************************************************************************** Param66 = 0, $ parameter value slot 6,"20 35 24 02 30 12", $ link size and path 0x0000, $ descriptor 0xC3, $ INT 2, $ number of bytes "T2 High Hysteresis", $ parameter name "", $ units string "", $ help string 0,32767,28780, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links ; $ precision $ **************************************************************************** $ * Trip Point 2 - Low Hysteresis $ **************************************************************************** Param67 = 0, $ parameter value slot 6,"20 35 24 02 30 13", $ link size and path 0x0000, $ descriptor 0xC3, $ INT 2, $ number of bytes "T2 Low Hysteresis", $ parameter name "", $ units string "", $ help string 0,32767,2187, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links ; $ precision $ **************************************************************************** $ * Trip Point 2 - Trip Status $ **************************************************************************** Param68 = 0, $ parameter value slot 6,"20 35 24 02 30 14", $ link size and path 0x0032, $ descriptor (RO, Mon, Enum) 0xC6, $ USINT 1, $ number of bytes "T2 Trip Status", $ parameter name "", $ units string "", $ help string 0,3,0, $ min, max, default ,,,, $ mult, div, base, offset scaling ,,,, $ scaling links ; $ precision Enum68 = 0,"no trip condition", 1,"low trip condition", 2,"high trip condition", 3,"high and low trip condition"; [Groups] Group1 = "Device Supervisor", $ group name 6, $ number of members 7,8,9,10,59,60; $ members Group2 = "Analog Sensor 1", $ group name 13, $ number of members 22,4,5,23,24,25,26,27,28,29, 30,31,32; $ members Group3 = "Trip Point 1", $ group name 9, $ number of members 45,46,47,48,50,61,63,64,65; $ members Group4 = "Trip Point 2", $ group name 9, $ number of members 52,53,54,55,57,62,66,67,68; $ members Group5 = "IO Data", $ group name 1, $ number of members 6; $ members $ End of INFICON PCG550 EDS File